Problem Solved! How to Remove Unknown Stains? - House Cleaning Lake City
  • 425-821-4503
  • customerservice@fourspc.com

Problem Solved! How to Remove Unknown Stains? - House Cleaning Lake City

It is common that we find stains on different surfaces around the house, most of the time we are not even sure what caused that stain, then comes in the worry since we don’t know what stain it is, we are not even sure how are we going to get it out either and this may cause permanent damage due to which we will have to replace the whole piece.

House Cleaning Lake City has got you covered there are particularly different methods that can be used to clean these unknown stains. 

1. From copper 

If proper care is not taken of copper or glass articles they may suffer from stains that we most probably don’t know how to treat. During house cleaning, make a mixture of warm water with a few drops of dish soap and add a few drops of ammonia to make it more effective, dip your cloth in this mixture and then wipe the stain. Let this mixture sit on the stain for a while then use normal water to rinse the residual off, then use a soft cloth to wipe the surface dry. 

2. From marble

During house cleaning, it is common that marble surface can be covered in stains too whether on a floor or on a shelf. The most common way to remove the stain from the surface is with the help of soapy water by scrubbing it in a circular motion. Then wipe it off with a clean water. When house cleaning, if the stain still persists then use a cotton pad dipped in rubbing alcohol, place it on top of the stain and let it sit for 5-10 minutes. After this replace it with a pad dipped in ammonia and keep replacing it alternatively. Once you see the stain getting rubbed off then use a dampened cloth to wipe the surface. 

3. Brick 

During house cleaning, our bricks too faced stains which are hard to remove, for removing these unknown stains you can apply using this effective method. When house cleaning, you can wash the surface using a washing soda or detergent and water. Then use a soft bristles brush to scrub the surface once you see the stains coming out, use normal water to rinse the surface and let it dry. 

4. Wood 

When house cleaning, it is very common that we find stains on the wooden surfaces and most of the time it is possible that you don’t even really know what has caused that stain. During house cleaning, take a bowl to make a mixture of dishwashing liquid and hot water, then use a clean microfiber cloth dipped in this mixture to scrub the stains. Once you find that the stains are coming out, then use a clean cloth dipped in water, squeezed out properly to wipe of the surface. You will find that the polish will sometimes get faded out after this process in that way you should reapply the polish as soon as possible.  

 

For more details call your local House Cleaning Lake City expert.